ABSTRACT
Objective: We report on the development and characterization of a UV-C (λ = 200 - 280 nm, λpeak = 254 nm) chamber designed for the rapid disinfection of N95 class filtering-facepiece respirators contaminated with SARS-CoV-2 coronaviruses. The device was evaluated against Betacoronavirus strain MHV-3 and its virucidal capacity was evaluated as a function of different applied UV-C doses (UV-C exposure times of 60 s, 120 s, 180 s, and 240 s) using two types of respirators geometry (shell and two-panel shapes, 3M 8801 H and 9920 H, respectively), at eight points of the respirators. Background: Most chemical disinfection methods are not recommended for N95 masks. UV-C light provided by UVGI lamps (254 nm) is an effective physical agent against viruses and bacteria due to direct photochemical harming effect on DNA/RNA, and can provide rapid disinfection for personal protective equipment such as N95/PFF2 masks. Results: The device reached a mean elimination rate of 99.9999% of MHV-3 inoculated into all the assessed different points on the tested PFF2 respirator models in a UV-C cycle of just 60 s. Statistical analysis performed through Person´s chi-square test showed no correlation between the viral infectivity reduction and the viral inoculation point (p = 0.512) and the tested respirator models (p = 0.556). However, a correlation was found between the exposure time and the viral infectivity reduction (p = 0.000*), between UV-C and no UV-C exposure. All the tested UV-C exposure times (60 s, 120 s, 180 s, and 240 s) provided the same reduction in infection rates. Therefore, 60 s was confirmed as the minimum exposure time to achieve a 99.9999% or 6 Log reduction in MHV-3 coronavirus infection rates in the PFF2 samples tested in the device. Conclusions: We conclude that the assessed UV-C chamber for the inactivation of MHV-3 coronavirus in N95/PFF2 standard masks can be a promising tool for effective and rapid disinfection of coronaviruses, including SARS-CoV-2 virus.
ABSTRACT
Objective: We report on the development and characterization of a UV-C light-emitting diode (LED) 280 nm cluster prototype device designed for the rapid disinfection of SARS-CoV-2 coronaviruses. The device was evaluated against the Betacoronavirus mouse hepatitis virus-3 strain, and its virucidal capacity was probed as a function of different applied UV-C doses versus different situations concerning irradiation distances. Background: UV-C LEDs are light emitters that offer advantages over low-pressure mercury lamps, such as quasimonochromaticity, lower electrical power consumption, instant on/off with the instant full-power operation, unlimited on/off cycles for disinfection schemes, and a much longer lifetime operation, in addition to portability aspects, as well as UV-C LEDs do not contain heavy metal in its composition such as mercury, found in ultraviolet germicidal irradiation (UVGI) lamps. Results: This novel device reached a 99.999% elimination rate at a distance of 9 cm at all the tested irradiation times (dose dependence), demonstrating that it took only 30 sec to achieve this inactivation rate. Its virucidal effectivity in rapid virus inactivation was demonstrated. Conclusions: We conclude that the HHUVCS cluster device (λp = 280 nm) provides a rapid virucidal effect against the SARS-CoV-2 coronavirus. The current research should encourage further advances in UV-C LED-based devices designed for the inactivation of SARS-CoV-2 virus on surfaces, in air, and in liquids.